|
|
|
|
| Home | Products | Price quote | Contact us | Search |
| The new TPI ScopePlus 440..... |
|
||||||
| The new TPI ScopePlus 440.....Typical Applications |
| Industrial Motor Control | View start-up inrush currents, waveform symmetry, SCR trigger pulses, variable frequency drive signals, pulse width modulation, noise, misc. AC and DC control signals. |
| Power Quality | Noise on industrial feeds, AC voltage waveshape, current waveforms, machine start-up / power quality interference and noise. |
| Prog. Logic Controls | PLC input and output signals, control signals, signal conditioning circuits, communications lines, power supplies. |
| NC Machines | Power quality, sensor outputs, control circuits, safety circuits, calibration and adjustments. |
| Uninterruptable Power Supplies | Sensing and monitoring circuits, switching circuits, output waveforms, current waveforms. |
| Audio | Public address feeds, amplifiers, mixers, preamps. |
| Video | Horizontal & vertical scan rates, z axis blanking, sync pulses, and luminance. |
| Industrial Lighting Controls | SCR's and other solid state designs |
| Factory Automation | Robotics, machine vision, machine control & sensing circuits, calibration of positioning systems, analog controllers, servo controls. |
| Line Conditioners | Noise and quality |
| Voltage Regulators | Noise and stability |
| Inverters | Waveform quality. |
| The new TPI ScopePlus 440.....Specifications |
SCOPE SPECIFICATIONS |
||
HORIZONTAL |
Sample Rate |
25 Ms/s |
Record Length |
512 samples in Single shot and Glitch Capture, 256 other modes |
|
Samples/Div |
20 |
|
Update Rate |
Real Time |
|
Modes |
Single shot, Recurrent, Roll |
|
Accuracy |
0.01% |
|
Sweep Rate |
1uS to 5s in 1,2,5 seq |
|
VERTICAL |
Bandwidth |
1MHz (DC to 5MHz DC coupled, 3Hz to1MHz AC coupled |
Resolution |
8 bits |
|
Channels |
Single |
|
Coupling |
AC, DC |
|
Input Impedance |
1.11 Mohm |
|
Accuracy |
+/- 3% |
|
Max input Volts |
1000 Volts |
|
TRIGGERING |
Type |
Internal |
Coupling |
AC, DC, Glitch Capture |
|
Slope |
+ or - edge |
|
Int. Trig. Sensitivity |
1/20 Division |
|
Max input Volts |
300 Volts |
|
OTHER |
Glitch Capture |
to 0.05uS |
Logic Test Display |
-3V & 5V CMOS, TTL |
|
Waveform Memory |
8 |
|
Set-up Memory |
8 |
|
Auto Set |
Y |
|
DMM SPECIFICATIONS |
||
DCV |
Range |
400mV, 4, 40, 400, 1000V |
Resolution |
0.1mV |
|
Accuracy |
+/- 0.3% + 2 digits |
|
ACV |
Range |
4, 40, 400, 1000V |
Resolution |
.001V |
|
Accuracy |
+/- 0.5% + 10 digits |
|
DCA |
Range |
400u, 4000u, 40m, 400m, 4, 10A |
Resolution |
0.1uA |
|
Accuracy |
+/- 0.1% + 2 digits |
|
ACA |
Range |
400u, 4000u, 40m, 400m, 4, 10A |
Resolution |
0.1uA |
|
Accuracy |
+/- 0.75% + 10 digits |
|
OHMS |
Range |
400, 4k, 40k, 400k, 4M, 40M |
Resolution |
0.1 ohm |
|
Accuracy |
+/- 0.3% + 2 digits |
|
CAPACITANCE |
Range |
10000pF, 0.1nF, 1uF, 10uF, 100uF, 1000uF, 10000uF |
Resolution |
10pF |
|
Accuracy |
+/- 3.0% + 5 digits |
|
FREQUENCY |
Range |
1kHz, 10kHz, 100kHz, 1MHz, 2MHz, 10MHz |
Resolution |
0.1Hz |
|
Accuracy |
+/- 0.05% + 1 digit |
|
OTHER |
Basic DC Accuracy |
0.4% |
Display Counts |
4000 |
|
Display Size |
63.97mm(W) |
|
69.97mm(H) |
||
Back lit LCD |
Yes |
|
For Information on other TPI Products |
| When placing your order, be sure to ask for your INTERNET DISCOUNT |
Home | Products | Price quote | Contact us | Search |
1-800-282-5632 |
