| TDS3TMT |
|
The new TDS3TMT application
module provides telecommunication network manufacturing engineers with breakthrough speed
capabilities, at the lowest price per channel, for testing digital network interface cards
up to 45Mb/s. The TDS3TMT module can be used to test E1/DS1, E3/DS3 standards called out
in ITU-T G.703 and ANSI T1.102 as well as user customized variations of these standards.
Modification to built-in industry standard masks is quickly and easily accomplished in a
familiar Windows® environment using Tektronix' WaveStar V2.3 Software for Oscilloscopes.
With WaveStar V2.3 Software for Oscilloscopes, a user can easily browse the
TDS3000C DPO
and transfer instrument files to and from their Windows desktop. |
| TDS3AAM |
|
Advanced analysis module.
Allows you to define waveforms as arbitrary math expressions - including a variety
of mathematical functions plus constants and measurements. Also adds area and cycle
area, differentiation, integration, averaging, and statistics.
|
| TDS3LIM |
|
Offers fast, accurate go/no go verification that tested circuits
are operating within intended parameters - ideal for repetitive testing applications where
go/no go decisions are required. You can easily create waveform reference templates
to compare to your live waveforms. You can also compare any number of input channels
with any combination of four references, and select actions for the TDS3000C scope
to take if a waveform strays outside the reference limits: stop acquisition,
sound a beep, print a hardcopy, or save the waveform to disk. |
| TDS3SDI |
|
601 serial digital video module. Allows you to trace and
identify ITU-R BT.601 video signals, examine their representative analog component
and composite waveforms and analyze the bit stream. Features include all the
capabilities of the TDS3VID plus Video picture mode with on-screen line select,
Vectorscope (Pb/Pr), YPbPr, RGB and YC waveforms. |
| TDS3VID |
|
Extended Video Applications
Module. Adds line count triggering, custom video scan and field rates,
readout in mV or IRE units, and includes 75ohm terminator. |
| TDS3GV |
|
GPIB (IEEE-488), VGA
out, and RS-232 interfaces |
| TDS3PRT |
|
The lightweight and compact thermal printer is easy to transport
and easy to use. Simply plug it into the built-in connector on the rear panel of every
TDS3000B oscilloscope and you'll have trouble-free documentation anywhere. The printer is
self-contained, draws its power directly from the oscilloscope and is activated via
one-button control on the TDS3000B's front panel. |
| 016-1907-00 |
|
5 roll pack of thermal printer paper |
| TDS3BATC |
|
Battery pack for up to
3hours continuous operation without line power. Note: the instrument must be grounded
at all times. |
| TDS3CHG |
|
Fast charger for battery
pack. |
| AC3000 |
|
Instrument soft carry case |
| HCTDS32 |
|
Instrument hard carry case |
| RM3000 |
|
Rackmount kit |
|
SIGEXPTE |
|
Oscilloscope software - Windows National Instruments Advanced Analysis
Software, Tektronix Edition |
| WSTRO |
|
Oscilloscope software - Windows |
