|
Network analyzer plus
options for spectrum analysis and absolute power
measurements in one
extremely light, compact, instrument
with a frequency range from 9 kHz to 3 GHz / 6 GHz
- The price of a low cost instrument, the
features and performance of a middle class instrument, the
weight and form of portable instrument.
- Adresses the entire market for design,
production, service and installation.
- Universal RF analysis. The most
important instruments in one box;
- bidirectional 2-port vector network
analyzer to characterize all 4 S-parameters,
- optional spectrum analyzer,
- optional power meter (with an R&S NRP
power sensor)
- Fully portable; weighs less than 7 kg,
optional battery power
- Frequency ranges from 9 kHz to 3 GHz /
6 GHz
|
Network Analyzer Characteristics
- Frequency range 9 kHz to 3 or 6 GHz
- Dynamic range: >115 dB (>123 dB typ)
- Bidirectional test set, measurement
of all 4 S-parameters
- Measurement bandwidths: 10 Hz to 500
kHz
- Number of measurement points: 2 to
4001
- Measurement speed @ 100 kHz IF BW and
201 meas. points: <60 ms
- Trace noise 0.005 dB (rms)
- Output power range: -50 to 0 dBm,
typical values -60 to +10 dBm
- Receiver step attenuator 0 to 30 dB
for measurement on active devices
Spectrum Analyzer Characteristics (R&S
FSL-K1)
- Frequency range 9 kHz to 3 or 6 GHz
- Resolution bandwidth: 300 Hz to 10
MHz in 1/3 sequence, zero span additionally 20 MHz,
optional 10 Hz to 10 MHz
- I/Q demodulation bandwidth: 20 MHz
- SSB Phase noise @ 1 GHz: typical
value -103 dBc (1 Hz) at 10 kHz carrier offset
- Third order intercept (T.O.I): +12
dBm, typical value
- Displayed average noise level: <-140
dBm (1Hz): with optional preamp: typical value= -163 dBm
(1Hz)
- Level measurement uncertainty: 0.5 dB
up to 3 GHz and 0.8 dB from 3 to 6 GHz.
- Full set of detectors: max peak, min
peak, auto peak, sample, rms, quasi peak, average
|
Measurement of a band pass filter at 2.2.
GHz showing 130 dB dynamic range
Measurement of the adjacent channel power
of an UMTS up-link signal:
|
|
|
|
|
|
|
Features
- Measurement of S-parameters, impedance,
admittance and stability
- Measurement output as Smith
chart, inverted Smith chart, magnitude and phase,
polar diagram, real / imaginary, group delay, VSWR
- Very high number of traces and
channels, overlay display of traces and different
channels in a single diagram
- Evaluation of traces within up
to 10 ranges: max, min, rms, mean, std deviation,
electrical length, phase delay
- Evaluation of band pass filters
in terms of center frequency, bandwidth, quality
factor, attenuation
- Optional spectrum analyser
(ZVL-K1) including all functions also available
with the network analyzer R&S ZVL
Operation
- Intuitive user interface for
hard and soft key or mouse control. Dialogues and
wizards for more complex tasks guide through the
measurement
- A context sensitive on-line
help function explains the used functions in
detail and provides the associated remote commands
for easy programming
- Undo and redo functions
- Operation from remote locations
via remote desktop function
- Easy export of the test setups,
measurement results or screen shots to the
internal flash disk or to an USB stick.Export or
import of measurement data in ASCII or Touchstone
format
- Remote control via 100/10 base
T-LAN interface or optional GPIB interface
- Operating System Windows XP
|
ZVL3, |
9
kHz to 3 GHz, |
|
ZVL6 |
9 kHZ to 6 GHz |
|
 |
  |
|
|
