|
Handheld TV Analyzer R&S FSH3 -TV |
| |
| The TV Analyzer R&S®FSH3-TV
is a battery-operated, handheld instrument that offers all the functions
and features of a spectrum analyzer, combined with the functions and
features of an analog and digital TV test receiver. It comes equipped with
a preamplifier, a tracking generator and a TV module that permits the
analysis of analog and digital TV signals and their demodulation. The
demodulated video signal, which is made available at an output that can be
used either as a CCVS (analog TV) or as a TS-ASI (digital TV) output, can
be routed to an external monitor or an MPEG-2 decoder. |
 |
|
Functions |
|
|
|
Analog TV Modulation Parameters |
|
Analog TV Receiver |
|
Analog TV
Analyzer |
|
Channel Tables |
|
Video Scope Function (Video Line Analysis) |
|
TV Receiver for DVB-C and J.83/B |
|
TV Receiver
for ATSC/8VSB |
|
Channel Power Measurements |
|
Carrier/Noise Ratio |
|
CSO, CTB, HUM (CATV Measurements) |
|
Shoulder Attenuation |
|
DIGITAL TV RECEIVER
(option R&S®FSHTV-K21
for QAM, R&S®FSHTV-K22 for 8VSB) |
|
|
Modulation Methods
-
4QAM, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM, 8VSB |
|
Bandwidth – Depending on Standard
-
6 MHz, 7 MHz and 8 MHz |
|
Symbol Rate by QAM/ATSC
-
2 MHz to 6.999 MHz/10.762238 MHz |
|
Inherent MER (equalizer ON)
-
> 40 dB |
|
|
ANALOG TV RECEIVER |
|
| Standards
-
B, G, H, D, K, I,
L, M, N |
Sound Standards
-
IRT-A2, NICAM, BTSC, EIA-J
Video Bandwidths
- Depending on Standard
Inherent S/N Video
- > 55 dB
|
|
|
|
|
|
Accessories for FSH Family |
|
FSH-B1 |
Distance tyo Fault Measurement including 1 M cable (needs
FSH-Z2 or FSH-Z3) |
|
|
FSH-K1 |
Remote Control For Handheld Spectrum Analyzer FSh (via
RS-232) |
|
|
FSH-K2 |
Vector Reflection and Transmission Measurement for FSH with
Tracking Generator |
|
|
FSH-K3 |
Receiver Mode |
|
|
FSH-K4 |
3GPP FDD Code Domain Power BTS/Node B Measurement for FSH
Model 23 Only |
|
|
FSHTV-K21 |
DVB-C/J83/A,B,C (QAM) Firmware for FSH3-TV |
|
|
FSHTV-K22 |
ATSC/8VSB Firmware for FSH3-TV |
|
|
FSH-Z1
|
Power
Sensor 10 MHz to 8 GHz |
|
| FSH-Z2
|
VSWR Bridge & Power Divider 10 MHz to 3 GHz for
FSHx (includes Open, Short and 50Ω load |
|
| FSH-Z14
|
Directional Power Sensor for FSHx (25 MHz to 1 GHz) |
|
| FSH-Z20
|
Spare
RF Cable, 1 M, N Connector |
|
| FSH-Z21
|
12 V
car adapter for FSHx |
|
| FSH-Z22 |
Serial/Parallel converter for FSHx |
|
| FSH-Z25
|
Soft
carrying bag for FSH |
|
| FSH-Z26
|
Transit Case for FSH |
|
| FSH-Z29 |
Combined Short/Open and 50Ω Load for VSWR and DTF calibration |
|
| FSH-Z30 |
Spare Short/Open Calibration Standard for FSH-Z2 for VSWR calibration |
|
| FSH-Z31
|
Spare 50 Ω Load Standard |
|
| FSH-Z32
|
Spare
Battery Pack for FSH |
|
| FSH-Z33 |
Spare
AC Power supply for FSH |
|
| FSH-Z34
|
Spare
R232 Optical interface cable for FSHx |
|
| FSH-Z35
|
Spare
CD-ROM with Control Software R&S FSH View
|
|
| FSH-Z36 |
Spare
Headphones for FSH |
|
| FSH-Z37
|
Optical to USB Interface Cable |
|
| FSH-Z38
|
75 Ω
Matching Pad N to BNC |
|
| RAZ
|
Matching Pad 50/75Ω, 0 MHz to 2700 MHz |
|
| |
|
|
|
Handheld Spectrum Analyzer R&S FSH - Specifications
FSH3_TV_Analyzer Data Sheet
Back To R & S Products Page |
|
|
 |
|
|
|
|
|
|
|
Ordering Information..... |
|
FSH3 |
3
GHz. Spectrum Analyzer |
$8,2000.00* |
|
 |
|
FSH313
|
3
GHz Spectrum Analyzer With Tracking Generator |
$10,550.00* |
|
|
FSH323 |
3GHz. Spectrum Analyzer
With Tracking Generator and Pre Amp |
$12,760.00* |
|
|
FSH3TV |
3 GHz TV Analyzer |
$12,950.00* |
|
|
FSH6 |
6
GHz. Spectrum Analyzer |
$13,070.00* |
|
|
|
|
FSH626
|
6 GHz Spectrum Analyzer With Tracking Generator and Pre Amp |
$16,470.00* |
|
|
FSH18 |
18 GHz TV Analyzer Spectrum Analyzer |
$19,060.00* |
|
|
|
| * When placing your
order, be sure to ask for your INTERNET DISCOUNT |
|
