Protek P6030 30 MHz. Analog Oscilloscope -Exphil Express

EXPHIL EXPRESS

(800) 282-5632

Protek P6030 30 MHz Analog Scope / Component Test

•	30 MHz Vertical Bandwidth (-3dB)
•	LCR Component Tester
•	Alternate Trigger for a stable display of unrelated signals
•	x5 Mag for Vertical Input and x10 for Horizontal
•	TV Synch Filter
•	Trigger Signal Output
•	High Brightness CRT with Internal Graticule

Specifications

Vertical Amplifier
(CH 1 and CH 2)

Sensitivity	5mV/Div to 20V/Div in 12 steps (1-2-5 seq) 1mV/Div to 4V/Div (X5 Mag)
Mag	x5
Accuracy	±3% (5% in X5 Mag)
Bandwidth (-3dB)	DC: 0Hz to 30MHz AC: 10Hz to 30MHz
Rise Time	< 18ns (<70ns in X5 Mag)
Input Impedance	Res: 1MW ±5%; Cap: 30pF
Input Coupling	AC, DC, GND
Invert Channel	CH2
CH1/CH2 Trigger Output	100mV/Div into 50W
Display Modes	CH1, CH2, ALT, Chop, ADD, X-Y
Maximum Input Voltage	400V (DC or AC peak)

Horizontal Sweep

Sweep Time	100ns/Div to 0.2s/Div in 20 steps (1-2-5 seq) 10ns/Div to 20ms/Div (X10 Mag)
Mag	x10
Accuracy	±3% (8% X10 Mag)
Sweep Modes	TV, Normal and Single

Triggering

Source	CH 1, CH 2, ALT, Line and EXT
Slope	Positive or Negative adjustable levels
Coupling	AC, DC, Normal/TV
Sensitivity (Int)	DC to 20MHz 1 Div
Sensitivity (Ext)	0.3V p-p)
Sensitivity (TV Int)	2 Div
Sensitivity (TV Ext)	0.3V p-p
Trigger Lock	50Hz to 10MHz 2 Div
External Trigger Input	Impedance: 1MW ±5% Maximum Input Voltage: 400V (DC or AC p-p)

Z Axis Modulation

Minimum Input Level	TTL
Maximum Input Voltage	50V or AC p-p
Polarity	Intensity increases as the voltage decreases
Input Resistance	10KW
Bandwidth (-3dB)	DC to 5MHz

X-Y Mode

Calibrator Signal

Component Test

A 60Hz, 9V RMS signal is applied to the CH1 and CH2 input when the AC, DC, GND is in the GND position and the component test button is pushed in.

General Specifications

CRT	8cm x 10cm (3.15" x 3.94")
Power Requirements	AC Input Voltage: 120V or 220V
Frequency	50/60Hz
Power Consumption	35W
Operating Temperature	0 to 40°C (32 to 104°F)
Size	5.1" (H) x 12.2" (W) x 16.45" (D)
Weight	14.3 lbs
Accessories	Manual, Line cord, X1/X10 Probes (2), Test Leads

Ordering Information

P6030C	30 MHz, 2 Ch Analog Oscilloscope w/ Component Test	$484.00 *

Includes.....	(2) Switchable 10X / 1X, 100 MHz. Probes
	(1) Instruction Manual
	(1) Power Cord

* When placing your order, be sure to ask for your INTERNET DISCOUNT

1-800-282-5632