EXPHIL EXPRESS

(800) 282-5632
Protek logo
 Hand Held Mulitmeters

  Home  |  Products  |  Price quote  |  Contact us  |  Search
 Bench Model DMM's.....
 
Go To Price / Ordering Information
 
  Model B4100
• 5-1/2 Digit multimeter with selectable count resolutions up to 200,000
• True RMS and measures frequency
• Selectable Count Resolutions: 2K, 20K, 200K
•  Auto-ranging
• Trend plot display
• RS-232 interface standard and optional GPIB interface
• Min/Max/Avg, Relative error and comparison functions
• May be used on line voltages from 85V to 250V without any internal changes
• Software included
• Seven setups may be stored and recalled in memory

Download Product Data Sheet
Model B845
• 4-1/2 digit LCD display with polarity indicator
• 0.05% DC voltage accuracy
• 10ľV AC & DC voltage resolution
• 10nA current resolution
• 10mW Resistance resolution
• Data hold switch
• Measures current to 10 Amps
• 200ľA AC/DC Current Range

Download Product Data Sheet
 3 3/4 Digit DMM Battery Operated......... Model B940
• True RMS AC volts and amps measurements
• Capacitance and Frequency measurements
• Back-lit display and Auto/Manual ranging
• MIN/MAX and Relative mode
• Delay hold mode
• AC Line or Battery Operated
• RS-232 Interface with software
• Portable or Bench with Pop-up Stand
• Storage Compartment

Download  Product Data Sheet
50000 to 80000 CountHand Held DMM's..... Model 6500 /  Model 6800
Model 6800
• 80,000 count Dual Display
• Basic DC accuracy is 0.05%
• Pulse output with frequency selection from 0.5Hz to 5KHz with duty cycles from 1% to 99%
• Measures frequency, ms Pulse width and duty cycle
• AC and AC+DC TRUE RMS measurements.
• Hi and Lo limit testing
• dBm measurement using 20 reference Impedances
• Min/Max/AVG
• Peak hold and Relative mode
• RS232 port
• CE and Category II 1000V and Cat III 600V safety standards
• Built in 10 hour timer

Download Product Data Sheet
  Model 6500
• 50,000 count and 50 segment bar graph backlit display
• Basic DC accuracy is ą0.03%
• RS232 interface with software and cable
• dBm measurement with 4W to 1200W reference resistances
• AC and (AC+DC) TRUE RMS measurement
• Measures frequency, Duty cycle and Capacitance
• Cat III 1000V
• Max/Min and Relative measurements
• Auto power off and backlit display

Download Product Data Sheet
 
Digit AC/DC Clamp Meters Models 304 / 305   Analog AC Meter A480B  Loop Calibrator 30C
  Model 304
• Measures AC/DC current to 1000A
• Manual ranging
• Measures Volts, Amps and Ohms
• 1.37" Jaw opening for cramped wiring locations
• Overload protection with indicator
• Data hold, Fused input
• Meets IEC-1010 Category III 600V safety standards

Download Product Data Sheet
  Model 305
• Measures AC/DC current to 1000A
• True RMS AC Measurements
• Auto/Manual ranging
• Frequency counter
• 40 segment analog bar graph
• 2-1/4" Jaw opening
• Meets IEC-1010 Category III 600V Safety Standards

Download Product Data Sheet
 
  Model A480B
• Temperature measurement
• Meter Lock Switch freezes measured reading for closer examination at safe location
• For use in plant maintenance, HVAC, electrical installation, motor repair and similar applications

Download Product Data Sheet
 
  Model 30C
• 24 volt internal loop supply
• Auto Step and Auto ramp modes.
No need for external mA meter.
• Simultaneous mA and % read out for quick, easy interpretation of reading
• 1ľA resolution for mA source, simulate and measure
• 25% step button for quick linearity tests
• Large 4 ˝ digit 20,000 count LCD display
• Encoder dial for easy one handed operation

Download Product Data Sheet
Back to Protek DMM Selection Page
Back To Top
 
  Ordering Information
B4100              Programmable 5-1/2 Digit Tru-RMS Bench Digital Multimeter $551.00 *
B4100GPIB              Programmable 5-1/2 Digit Tru-RMS Bench Digital Multimeter GPIB Installed $686.00 *
B845              4-1/2 Digit  Bench Digital Multimeter $276.00 *
B940              4000 Count Bench / Battery Digital Multimeter  with RS-232 $168.00 *
6800              80,000 Count Dual Display Handheld DMM $194.00 *
5800              50,000 Count Handheld DMM, 50 Segment Bar Graph, Backlit Display $173.00 *
304              1000 Amp, 3-3/4 Digit AC/DC Digital Clamp-on Meter $158.00 *
304              1000 Amp, 3-3/4 Digit AC/DC Digital Clamp-on Meter / Frequency $200.00 *
A480B              300 Amp  Analog Clamp-on Meter $50.00 *
30C            Loop Calibrator $423.00 *
 
When placing your order,  be sure to ask for your INTERNET DISCOUNT
 
  Home  |  Products  |  Price quote  |  Contact us  |  Search  (800) 282-5632