|
|
Frequency Characteristics |
|
|
Frequency Range |
0.004Hz to 4MHz in 7 ranges |
|
Ranges |
x1, x10x, x100, x1K, x10k, x100k, x1M |
|
Dial Accuracy |
5% of full scale |
|
|
|
|
|
Waveforms |
Sine, Square, Triangle, TTL Pulse |
|
High Output |
Amplitude: 15mV to 10V (into 50W)
DC Offset: 0 to ±5 into 50W
Impedance: 50W
Attenuator: 30dB variable |
|
Low Output |
Amplitude: 0 to 1V (into 50W)
DC Offset: 0 to ±0.5 (into 50W)
Impedance: 50W
Attenuator: 30dB variable |
|
|
|
|
|
Frequency Range |
0.004Hz to 4MHz |
|
Flatness |
±2.0 % (0.004Hz to 400KHz)
±10% (400KHz to 4MHz) |
|
Harmonic Distortion |
< 0.5 % on the 1K and 10K range
1% on the x1, x10, x 100 and x100K ranges
25dBc on the x1M range |
|
|
|
|
|
Frequency Range |
0.004Hz to 4MHz |
|
Rise/Fall Time |
< 50ns into 50W (High
output terminals) |
|
Symmetry |
±1% to 100KHz
±5% to 4MHz |
|
|
|
|
|
Linearity |
> 99% to 200KHz |
|
|
|
|
|
Modes |
Operating modes (CW, Triggered, Gated, Sweep,
Manually Triggered) |
|
Trigger/Gate Input Level |
TTL |
|
Trigger/Gate Frequency Range |
To 4MHz Max. |
|
Trigger/Gate Minimum Pulse Width |
< 50ns |
|
|
|
|
|
Type |
Linear and Log |
|
Sweep Time |
30ms to 60 seconds continuously variable |
|
Sweep Width |
1:1,000 linear
1:10,000 log continuously variable
Sweep start and stop frequencies may be set with the Freq dial
and the Freq. Stop control. |
|
|
|
|
|
Sync |
TTL level |
|
GCV |
Output proportional to the selected frequency, 0
to -5V |
|
Sweep |
4V P-P |
|
Impedance |
600W |
|
|
|
|
|
Input Voltage |
0 to ±4V P-P will cause a 1:1,000 frequency
change (linear) and 1:10,000 (Log) |
|
Input Impedance |
2KW |
|
|
|
|
|
Operating Temperature |
0 to 50°C (32 to 120°F) |
|
Size |
3.5" (H) x 11.4" (W) x 10.6" (D) |
|
Weight |
5 lbs |
|
AC Line Voltage |
120/220V, 50/60Hz |
|
Accessories |
Manual, Line cord, BNC cable |
|
