|
Frequency Characteristics |
|
|
Frequency Range |
0.01Hz to 10MHz |
|
|
|
|
|
Waveforms |
Sine, Square Pulse, Triangle and ramp |
|
Impedance |
50W |
|
Attenuator |
20dB, 40 dB, 60dB and 20 dB variable |
|
Amplitude |
0
to ±10 Volts in to an open circuit |
|
DC Offset |
0 to ±10 V in to an open circuit (0 to ±5 into 50W) |
|
|
|
|
|
Frequency Range |
0.01Hz to 10MHz |
|
Flatness |
±3.5% from 0.01Hz to 100KHz
±10% 100KHz to 10MHz |
|
Harmonic Distortion |
< 0.5 % from 10 Hz to 40KHz |
|
Symmetry |
20:80 to 80:20 |
|
|
|
|
|
Frequency Range |
0.01Hz to 10MHz |
|
Rise/Fall Time |
<
25ns into 50W |
|
|
|
|
|
Frequency Range |
0.01Hz to 10MHz |
|
Rise Time |
<
10ns |
|
Duty Cycle |
Adjustable symmetry control from 20:80 to 80:20 |
|
|
|
|
|
|
|
|
|
|
Modes |
CW, Triggered, Gated, Burst Sweep |
|
Trigger/Gate Input Level |
TTL |
|
Trigger/Gate Frequency Range |
DC to 100KHz |
|
Burst Time |
1ms
to 10s |
|
|
|
|
|
Type |
Linear and Log |
|
Sweep Time |
1ms
to 2s in 2 ranges, continuously variable |
|
Sweep Width |
1:100 continuously variable. Sweep start frequency
may be set with the SET/MOD control. |
|
|
|
|
|
Input |
External Through the MOD input connector |
|
Frequency |
DC
to 1MHz |
|
Modulation Range |
0 to 100% |
|
Modulation Voltage |
0
to 5V P-P |
|
|
|
|
|
Input |
External through the VCG input |
|
Tuning Range |
1000:1 with an input of 0 to -5V |
|
|
|
|
|
Sync |
TTL level |
| GCV |
Output proportional to the selected frequency, 0 to -5V |
|
Sweep |
0 to -5V |
|
Sweep/Burst Gate |
TTL
level |
|
|
|
|
|
Operating Temperature |
0 to 50°C (32 to 120°F) |
|
Size |
4.3" (H) x 12.5" (W) x 14" (D) |
|
Weight |
15 lbs |
| AC
Line Voltage |
120/220V, 50/60Hz |
|
Accessories |
Manual, line cord, BNC cable |
|
