Protek 3290 RF Signal Strength Analyzer

EXPHIL EXPRESS

(800) 282-5632

Protek Model 3290 RF Signal Strength Analyzer

Specifications

Frequency

Frequency Range	100kHz to 2900MHz
Frequency Step	5kHz to 9995kHz in multiples of 5kHz or 6.25kHz
Ref. Oscillator Accuracy	±3 PPM
Frequency Marker Accuracy	±25 PPM
Frequency Measurements	Narrow Band FM, Wide Band FM, AM and Single side band

Input

Input Impedance	50W
Maximum Input Volts	5V RMS (+27dBm)
Measurement Units	dBmV, dBµV, dBm
Attenuation	0dB or -10dB internal; 0dB to 60dB with external Attenuator

Narrow Band FM

Level Measurement Range	-117dBm to -67dBm (300MHz to 1800MHz) -107dBm to -67dBm (1MHz to 300MHz and 1800MHz to 2900MHz)
Resolution	±0.5dB; Accuracy: ±3dB
Bandwidth	12.5kHz

Wide Band FM, AM & SSB

Level Measurement Range	-107dBm to -57dBm (300MHz to 1800MHz) -97dBm to -57dBm (10MHz to 300MHz and 1800MHz to 2900MHz)
Resolution	±0.5dB
Accuracy	±3dB
Bandwidth	Wide band FM: Approx. 180kHz AM and SSB: Approx. 2.4kHz
BFO Frequency Range	±1.5kHz
Reception Sensitivity	0 to 6dBµV EMF with supplied antenna
Antenna Reception S/N Ratio	N-FM: 10 dB; W-FM: 12 dB

Display

Display Modes	Spectrum, Bar graph, Frequency counter
Spectrum Display	Displays 160 channels
Bar Graph Displays	Multi channel (2, 5, 10, 20, 40, 80, 160 bar graphs per display), Single Channel and 2 Channel difference
Sweep Modes	Single, Normal, Free run
Spurious Signals	(internally generated) -35dBc for W-FM -45dBc for N-FM (typical below full scale signal level)

Scan Mode

Mode	Manual, Channel (memory scan) and Search scan
Rate	125 Ch/s

Memory

Data Memory	Stores 10 displays of up to 160 CH per display
Setup Memory	Stores 10 setups for each scan mode

Frequency Counter

Bandwidth	9MHz to 2900MHz
Resolution	1kHz
Accuracy	50PPM ±1 count
Input Impedance	50W
Max Input Volts	5V RMS
Response Time	0.512 Sec.
Input Sensitivity	9MHz to 2060MHz: 120mV 20MHz to 1500MHz: 50mV 2MHz to 2800MHz: 500mV 2800MHz to 2900MHz: 750mV
Data Memory	Stores 10 Readings

Miscellaneous

LCD	192 x 192 Pixels, Light green
Back Light	LED. Back light will shut off 5 seconds after the last key depression
Interfaces	Std RS-232 interface with female 8 pin mini Din connector. Baud Rates of 1200, 2400, 4800 or 9600 BPS are menu selected. The software supplied is a Windows(r)-based program, which runs under Windows 95/98/ME/XP/2000.
Auto Power Off	5, 10, 20 or 30 minutes after the last key depression-user selected.
Audio Output	120mW into a 8W Speaker
Power Requirements	(6) AA NiCd or Alkaline Batteries, 12 volt car adapter or 11V to 16V 500 mA Max AC to DC adapter

General Specifications

Operating Temperature	0°C to 40°C
Relative Humidity	35% to 85%
Storage Temperature	-10 to 50°C
Size	9.5" H x 4.0" W x 1.8" D
Weight	1.4 lb
Supplied Accessories	Manual, (6) 1.5V AA NiCd Batteries, Detachable 9" whip antenna, RS-232 Cable, Carrying case, Earphone, Carrying strap and Software, Vehicle power adapter, AC/DC converter.

Counter Mode	Multi-Channel Mode
Display frequency and level of measured signal as a numeric value using the Counter Mode.	6 Types of Multi-Channel displays are available (4, 10, 20, 40, 80, 160CH).
Difference Mode	Single-Channel Mode
Scanning Marker channel, step frequency channel and level difference between the 2CH are displayed in bar-graph.	Signal level at the marker is displayed in bar-graph.
BAR 160CH	BAR 5CH
Scans and displays 160 channels as bar-graphs. 160, 80, 40, 20, 10 and 5CH available.	Shows 5 channels being displayed as bar-graphs.
Applications (Satellite TV)

Applications (Tapping Detection)

Applications (Others)

Ordering Information

Model 3290	2900 MHz RF Signal Strength Analyzer	$3109.00 *
Includes.....	(6) 1.5V AA NiCd Batteries,
	(1) Instruction Manual
	(1) Detachable 9" whip antenna
	Vehicle power adapter, AC/DC converter.
	RS-232 Cable, Carrying case, Earphone, Carrying strap and Software

* When placing your order, be sure to ask for your INTERNET DISCOUNT

1-800-282-5632