| MAIN
OUTPUT |
|
|
| Frequency Range |
0.5Hz to 5 MHz (7 ranges) |
|
| Amplitude |
>10Vp-p (into 50 ohm load) |
|
| Impedance |
50 ohm+10% |
|
| Attenuator |
-20dB+1dB x 2 |
|
| DC Offset |
<-5V ~ >5V( into 50 ohm load) |
|
| Duty Control |
80% : 20% : 80% to 1MHz Continuously variable |
|
| Display |
6 digit LED |
|
 |
| SINE WAVE |
| Distortion |
<1% 0.5Hz ~ 100kHz, THD<30dB below
fundamental in all ranges (Specification applied from MAX. to 1/10 level) |
| Flatness |
<0.3dB, below 500kHz, <1dB below 5
MHz. |
|
|
| SQUARE WAVE |
| Symmetry |
+2%, 1Hz ~ 100kHz |
| Rise/ Fall Time |
< 50ns at maximum output (into 50 ohm load) |
|
|
| TRIANGLE
WAVE |
|
| Linearity |
>98% 0.5Hz ~ 100kHz, >95% 100kHz ~
5MHz |
|
|
| CMOS
OUTPUT |
|
| Rise/Fall Time |
<120nS |
| Level |
4Vpp+1Vpp ~ 14.5Vpp+0.5Vpp adjustable |
|
|
| TTL
OUTPUT |
|
| Rise/Fall Time |
<25nS |
| Fan Out |
20 TTL load |
| Level |
>3Vpp |
|
|
| VCF |
|
| Input Voltage |
0V~10V ± 1V(100 : 1) |
| Input Impedance |
10k ohm ±10% |
|
|
| GCV |
|
| Output Voltage |
To set the voltage between 0V ~ 2V as per different
frequency |
|
|
| SWEEP
|
|
| Sweep/Manual |
Switch selector |
| Sweep/Rate |
100 : 1 ratio max. and adjustable |
| Sweep/Time |
0.5sec. ~ 30sec. adjustable |
| Sweep/Mode |
Lin./Log. switch selector |
|
|
| AMPLITUDE MODULATION |
|
| Depth |
0 - 100% |
| MOD. Frequency |
400Hz (INT), DC ~ 1MHz(EXT |
| Carrier BW |
100Hz ~ 5MHz (-3dB) |
| EXT Sensitivity |
<10Vpp for 100% modulation |
|
|
| FREQUENCY
MODULATION |
|
| Deviation |
0 ~ + 5% |
| MOD. Frequency |
400Hz(INT),Dc ~ 20kHz(EXT.) |
| EXT. Sensitivity |
<10Vpp for 10% modulation |
|
|
| FREQUENCY
COUNTER |
|
| Int./Ext. |
switch selector |
| Range |
0.5Hz ~ 5MHz (5Hz ~ 150MHz EXT.) |
| Accuracy |
Time base accuracy ±1 Count |
| Time Base |
±10PPM (23°C±5°C) after 30 minute warm up |
| Resolution |
The maximum resolution is 10nHz for 1Hz and 0.1Hz for
100MHz |
| Input Impedance |
1Mohm//150pF |
| Sensitivity |
<35m Vrms (5Hz ~ 100MHz), < 45mVrms
(100MHz ~ 150MHz) |
|
|
| POWER
SOURCE |
AC 115V, 230V, ±15%, 50/60Hz |
| ACCESSORIES |
(2)GTL-101 Cable - Alligator Clips to BNC
Connector
Instruction Manual |
| DIMENSIONS |
9.8" (W) x 3.5" (H) x 11.3" (D) |
| WEIGHT |
Approx 5.3 Lbs. |
