| MAIN
OUTPUT |
|
Output Waveforms |
Sine, Square, Triangle,
±Ramp, Pulse, AM, FM, Sweep, Trigger, Gate or Burst |
|
Frequency Range |
10mHz~15MHz in 8 Frequency
Ranges (auto-switch) |
|
Frequency Resolution |
15MHz~150kHz (100Hz)
1.5MHz~15kHz (10Hz)
150kHz~1.5kHz (1 Hz)
15kHz~150Hz (0.1Hz)
1.5kHz~15Hz (10MHz)
150Hz~1.5Hz (10mHz)
15Hz~0.15Hz(10mHz)
1.5Hz~0.01Hz (10mHz) |
|
Frequency Accuracy |
0.02% ±5 Count |
|
Output Impedance |
50Ω ±10% |
|
Amplitude Range |
10.00V~0.01V (into 50
ohms) 4 amplitude range;
|Vac peak| + |Vdc| = 5V
Resolution: 10mV (10.00V~0.01V) |
|
Amplitude Accuracy |
≤3% ±5 count at 10Hz~1MHz
≤10% ±5 count at 1MHz~1.5MHz |
|
Amplitude Unit |
Vpp, Vrms,
dBm |
|
DC Offset |
-5V~5V (into 50Ω);
Resolution 10mV |
|
DC Offset Accuracy |
≤3% ±3 count at Amplitude
Min |
|
Duty Control |
80%:20%:80% ~ 1MHz;
Resolution 1% |
|
Duty Accuracy |
≤1% ~ 1MHz at 50% Duty |
|
Display |
Dual Display for Frequency
6 digits and Amplitude 4 digits |
|
| SYNC OUTPUT |
|
Impedence |
50Ω ±10% |
|
Level |
>1Vp-p open
circuit |
|
SINE WAVE |
|
Distortion |
≤0.5%(-46dBc) From
10Hz~150kHz; ≤-30dBc to 15MHz;
(Spec applied from 1Vpp to 10Vpp) |
|
 |
| SQUARE WAVE |
|
Asymmetry |
±1% of period + 3ns |
|
Rise or Fall Time |
<18nSec |
|
|
|
| TRIANGLE
WAVE |
|
|
|
Linearity Error |
<1% of full scale output at 100Hz |
|
|
|
|
TRIGGER CHARACTERISTICS |
|
Start/Stop Phase Range |
90°~260° |
|
Rate |
0.01Hz~10kHz |
|
Frequency Range |
0.1Hz~1MHz (Useful ~ 10MHz) |
|
Ext Trig Frequency Range |
DC ~ 1MHz, TTL compatible input level |
|
Gate or Burst |
Implement by Trigger setting |
|
|
|
| VCF |
|
Range |
100:1 (0~10V±1V) |
|
Input Linearity |
<0.5% to 1MHz, <5% to 10MHz |
|
Input Impedance |
10kΩ |
|
|
|
| GCV |
| To set
the voltage between 0.2v to 2v as per different frequency in same frequency
range |
|
|
| SWEEP
|
|
Sweep Range |
15MHz~150kHz
1.5MHz~15kHz
15.0kHz~1.5kHz
15kHz~150Hz
1.5kHz~15Hz
150Hz~1.5Hz
15Hz~0.15Hz
1.5Hz~0.01Hz |
|
Width |
≥100:1 (In same frequency range) |
|
Rate |
0.01Hz~10kHz |
|
Symmetry Control |
90:10:90; Resolution: 1% |
|
Mode |
Linear/Log Sweep |
|
Sweep Output |
0~≥-5Vp-p into 10kΩ |
|
|
|
| AMPLITUDE MODULATION |
|
Depth |
0~100% |
|
Modulation Frequency Rate |
0.01Hz~10kHz in 3
frequency range (auto switch) |
|
Carries -3dM Bandwidth |
<100Hz to >MHz |
|
External Sensitivity |
≤ 10Vpp for
100% modulation |
|
|
|
| FREQUENCY
MODULATION |
|
Deviation |
0~±15% |
|
Modulation Frequency Rate |
0.01Hz~10kHz(INT)
DC~1MHz(EXT) |
|
External Sensitivity |
≤ 5Vpp for 15%
deviation |
|
|
|
| FREQUENCY
COUNTER |
|
/EXT |
Switch Selector |
|
Range |
5Hz~150MHz EXT |
|
Accuracy |
Timebase Accuracy ±1 count |
|
Time Base |
±20ppm(23°±5°C) after 30
minutes warm up |
|
Resolution |
The maximum resolution is
100nHz for 1Hz and 1Hz for 100MHz |
|
Input Impedance |
1MΩ//150pF |
|
Sensitivity |
≤35mVrms(5~100MHz);
≤45mVrms(100MHz~150MHz) |
|
|
MEMORY |
Save/Recall 10 SETS
OF FRONT PANEL SETTING MEMORIES |
|
INTERFACE |
RS-232 STANDARD |
|
POWER SOURCE |
AC 115/230V
±15%, 50/60hZ. |
|
ACCESSORIES |
POWER CORD,x1, Instruction
Manualx1, GTL-101 LEADS x2 |
|
DIMENSIONS |
11.5"(W), 5.6'(H), 18"(D);
APPROX. 11 lbs. |
|
|
|
Ordering Information..... |
|
GFG-3015 |
15 MHz. Function
Generator |
$799.00
* |
|
|
| Includes.....
|
(2) GTL-101 Cable - Alligator Clips to BNC Connector |
|
|
(1) Instruction Manual |
|
|
(1) Power Cord |
|
|
|
|
| * When placing your
order, be sure to ask for your INTERNET DISCOUNT |
Back to
Function Generators Selection Guides
|
