|
CRT |
Type: |
6-inch rectangular type with internal graticule;
8 x 10 DIV (1 DIV = 1 cm) |
|
Z-Axis Input: |
Input impedance: approx 5kW
Sensitivity: above 3Vpp
Bandwidth: DC ~ 5MHz |
|
Vertical System |
Sensitivity: |
5mV ~ 5V/DIV ±3%
1mV ~ 2mV/DIV ±5% |
|
Bandwidth: |
DC ~ 20MHz
DC ~ 10MHz at 1mV ~ 2mV/DIV |
|
Rise Time: |
17.5ns (35ns at 1mV ~ 2mV/DIV) |
|
Input Impedance: |
1MW
approx |
|
Input Coupling: |
AC, DC, GND |
|
Vertical Mode: |
CH1, CH2, DUAL (automatic switching CHOP and
ALT), CH2 INV, ADD |
|
Horizontal System |
Sweep Time: |
0.1µs ~ 0.5s/DIV ±3%
100ns ~ 50ms/DIV ±5% (x 10 MAG)
10ns ~ 50ns/DIV ±8% (x 10 MAG) |
|
Trigger |
Trigger Mode: |
AUTO, NORM, SINGLE |
|
Trigger Source: |
CH1, CH2, ALT, LINE, EXT |
|
Trigger Coupling: |
AC, DC, HF REJ, TV |
|
Trigger Slope: |
"+" or "-" |
|
X-Y Operation |
Sensitivity: |
5mV ~ 5V/DIV ±4% |
|
X-Axis Bandwidth: |
DC ~ 1MHz |
|
Phase Error: |
3º or less from DC ~ 50kHz |
|
Output Signal |
Trigger Signal Output: |
Voltage: approx 50mV/DIV into 50W |
|
Calibrator Output: |
1kHz square wave, 2Vpp ±2% |
|
Other Details |
Power Source: |
AC 100V/120V/230V ±10%, 50/60Hz |
|
Accessories: |
Power cord x 1, Instruction manual x 1, Probe
(10:1/1:1) x 2 |
|
Dimensions: |
310mm (w) x 150mm (h) x 455mm (d) |
|
Weight: |
8.2kg approx |
