Instek GOS-6200 200 MHz. Analog Oscilloscope

EXPHIL EXPRESS

(800) 282-5632

GOS 6200 200 MHz Analog Oscilloscope

Home | Products | Price quote | Contact us | Search

Instek GOS-6200 2100 MHz Analog Scope

200 MHz, Dual Channel, Delayed Sweep
Built-in 6 Digit Universal Counter
Auto Set
TV-Line Selection (NTSC, PAL, SECAM)
10 Sets Memory for SAVE & RECALL of Front Panel Settings
Cursor Readout with 7 Measurements
Panel Setup Lock of Digital-Control Functions
Buzzer Alarm
LED Indicators
Trigger Signal Output
Z-Axis Modulation Input
SMD Technology, High Stability and Reliability

Instek GOS-6200 200 MHz Analog Oscilloscope

Go To Price / Ordering Information

Specifications

CRT

Type

6-inch rectangular type with internal graticule;
0%, 10%, 90% and 100% markers. 8 x 10 DIV (1 DIV=1 cm)

Phosphor

P31

Accelerating Potential

14 kV approx.

Illumination

Continuously adjustable

Z-axis input

Coupling : DC

Sensitivity : 5V or more

Maximum input voltage : 30V (DC+AC peak) at 1kHz or less

Bandwidth : DC ~ 5MHz

VERTICAL SYSTEM

Sensitivity

2mV ~ 5V/DIV,11 step in 1-2-5 sequence

Sensitivity Accuracy

< 3% (5 DIV at the center of display)

Vernier Vertical Sensitivity

Continuously variable to 1/2.5 or less panel-indicate value

Bandwidth(-3dB)

DC ~ 200MHz (2mV/DIV : DC ~ 20MHz)

Rise Time

1.75nS (2mV/DIV : 17.5 nS)

Signal Delay

Leading edge can be monitored

Max. Input Voltage

400V (DC+AC peak) at 1kHz or less

Input Coupling

AC, DC, GND

Input Impedance

1M+2%// approx. 25pF

Vertical Mode

CH1, CH2, DUAL (CHOP/ALT), ADD, CH2 INV.

Bandwidth Limited

20MHz

Common-Mode Rejection Ratio

50 :1 or better at 50kHz

Dynamic Range

8 div at 100MHz¡F5 div at 200MHz

HORIZONTAL SYSTEM

Horizontal Modes

MAIN(A), ALT, DELAY(B)

A(main)Sweep Time

20nS ~ 0.5S / DIV, continuously variable (UNCAL)

B(delay)Sweep Time

20nS ~ 50mS/DIV

Accuracy

+ 3% (+ 5% at x 10 MAG)

Sweep Magnification

x 10 (maximum sweep time 2nS / DIV)

Hold Off Time

Variable

Delay Time

1µS ~ 5S

Delay Jitter

Better than 1:20000

Alternate Separation

Variable

TRIGGER

Trigger Modes

AUTO, NORM, TV

Trigger Source

CH1, CH2, LINE, EXT, EXT/10

Trigger Coupling

AC, DC, HFR, LFR, NR

Trigger Slope

"+" or "-" polarity or TV sync polarity

Trigger Sensitivity

Mode	Frequency	INT	EXT	EXT/10
AUTO	10Hz~20MHz	0.35 DIV	50 mV	500 mV
AUTO	20MHz~200MHz	1.5 DIV	150 mV	1.5 V
NORM	DC~20MHz	0.35 DIV	50 mV	500 mV
NORM	20MHz~200MHz	1.5 DIV	150 mV	1.5 V
TV	sync signal	1 DIV	200 mV_pp	2 V_pp

Trigger Level Range

INT :±4DIV or more EXT :±0.4V or more EXT/10 :±4V or more

TV Triggering

Mode : TV-V, TV-H, TV-LINE

TV-Line Selection

Standard	Filed 1	Filed 2
NTSC (525H)	1H~263H	1H~262H
PAL (625H)	1H~313H	1H~312H
SECAM (625H)	1H~313H	1H~312H

Max. External Input Voltage

400V (DC+AC peak) at 1kHz

External Input Impedance

1M+ 5%, // approx. 25pF

X-Y OPERATION

Mode

X-axis : selectable CH1, EXT, EXT/10

Y-axis : selectable CH1, CH2, CH1 and CH2

Sensitivity Accuracy

2mV ~ 5V / DIV ±3% EXT : 0.1V / DIV±5% EXT / 10 :1V / DIV±5%

X-axis Bandwidth

DC ~ 500kHz (-3dB)

Phase Error

3º or less from DC ~ 50kHz

OUTPUT SIGNAL

Trigger Signal Output

Voltage : approx. 25mV/DIV into 50 ohms

Frequency response : DC ~ 10MHz

Calibrator Output

1kHz Squarewave, 2Vpp±2%

CURSOR READOUT FUNCTION

Cursor Measurement Function

V, V%, Vdb, T, 1/T, T%, phase

Cursor Resolution

1 / 100 DIV

Effective Cursor Range

Vertical : ±3DIV ; Horizontal : ±4DIV

Panel Setting Display

Vertical : V/DIV(CH1,CH2), UNCAL, ALT/CHOP/ADD, INV, probe factor, AC/DC/GND

Horizontal : S/DIV(MTB,DTB), UNCAL, x 10MAG, delay time, HO

Trigger : source, coupling, slope, level, TV-V, TV-H

Others : X-Y, lock, save/recall MEM 0-9

AUTO MEASUREMENT FUNCTION

Parameter Function

FREQ, PERIOD, ±WIDTH, ±DUTY ( + or - polarity selected by trigger slope)

Display Digits

Max. 6-digits, decimal

Frequency Range

50Hz ~ 200MHz

Accuracy

1kHz ~ 200MHz : +0.01% 50Hz ~ 1kHz : +0.05%

Measuring Sensitivity

>2 div (Measuring source selected from CH1 and CH2 as synchronous signal sources)

SPECIAL FUNCTION

Auto Set

Input Channel : CH1, CH2¡FFrequency Response 50Hz~50MHz

Panel Setting Save & Recall

10 sets

Panel Setups Lock

Provided

POWER SOURCE

AC 100V / 120V / 230V + 10%, 50 / 60Hz

ACCESSORIES

Power cord x 1; Instruction manual x 1; Probes(10:1/1:1) x 2

DIMENSIONS & WEIGHT

310(W) x 150(H) x 470(D) mm Approx. 9kg

Ordering Information

GOS-6200	200 MHz, 2 Ch Analog Oscilloscope w/ Cursors & Readout	$1,950.00 *

Includes.....	(2) Switchable 10X / 1X, 100 MHz. Probes
	(1) Instruction Manual
	(1) Power Cord

* When placing your order, be sure to ask for your INTERNET DISCOUNT

Back to Analog Oscilloscopes Selection Guides

Home | Products | Price quote | Contact us | Search

1-800-282-5632