EXPHIL EXPRESS

(800) 282-5632
instek analog scopes
GRS-6000 Series
Analog / Digital Storage Scopes
  Home  |  Products  |  Price quote  |  Contact us  |  Search
Lowest Price.......SAVE at least 10% on all Instek Products.... Call Now.....800-282-5632
spacer.gif (807 bytes)
  Instek GRS6052, GRS6032  Combination Analog / Digital Storage Oscilloscopes
spacer.gif (807 bytes)
spacer.gif (807 bytes)

  • GRS-6052: DC~50MHz, 20MS/s
    GRS-6032: DC~30MHz, 20MS/s

  •  2 Channels, 4 Traces

  •  Equivalent Time Sampling of 500MSa/s max.

  •  Waveform SAVE / RECALL (M0~M9)

  •  Pre-trigger Function 0 ~ 10 div.

  •  ROLL Mode to 100s/div.

  •  Max. Sweep Rate 10ns/div.

  •  Cursor Readout Function: ∆V, ∆T, 1/∆T

  •  ALT-MAG Function (x5, x10, x20)

  •  Panel Setting SAVE / RECALL 10 sets

Go To Price / Ordering Information

  Specifications.....
spacer.gif (807 bytes)
spacer.gif (807 bytes)
spacer.gif (807 bytes)

CRT

Type GRS-6052: 6-inch CRT 150CTB31, 10kV
GRS-6032: 6-inch CRT D14-363GY, 2kV
INTEN and FOCUS Front panel control
Illumination Front panel control
Z-axis Output Sensitivity: at least 5V (TTL)
Polarity: positive going input decrease intensity
Max.input voltage: 30V (DC+AC peak)
GRS-6052: Input impedance: approx. 47kΩ
GRS-6032: Input impedance: approx. 33kΩ

VERTICAL SYSTEM

Sensitivity and Accuracy 1mV ~ 2mV/DIV±5%, 5mV ~ 20V/DIV±3%, 14 calibrated steps in 1-2-5 sequence
Variable Continuously 2.5:1 ~ min. 50V/DIV
Bandwidth (-3dB) and Rise Time
   

Bandwidth(-3dB)

Rise Time

GRS-6052 5mV ~ 20V/DIV

DC ~ 50MHz

Approx. 7nS
1mV ~ 2mV/DIV

DC ~ 7MHz

Approx. 50nS
GRS-6032 5mV ~ 20V/DIV

DC ~ 30MHz

Approx. 11.7nS
1mV ~ 2mV/DIV

DC ~ 7MHz

Approx. 50nS
Vertical Mode CH1, CH2, DUAL(ALT or CHOP)
Chopper Frequency Approx. 250kHz
Sum or Difference CH1+CH2, CH1-CH2
Invert CH2
Input Impedance Approx. 1MΩ±2% // approx. 25pF
Input Coupling AC, DC, GND
Maximum Input Voltage 400V (DC + AC peak)

HORIZONTAL SYSTEM

Sweep Time 0.2µS/DIV ~ 0.5S/DIV, 20 steps selectable in 1-2-5 sequence
Variable Continuously 2.5:1 UP TO 1.25s/DIV (uncal.)
Accuracy ±3%, ±5% at x5, x10 MAG. ±8% at x20 MAG
Sweep Magnification x5, x10, x20
Max. Sweep Time GRS-6052: 20nS/DIV (10nS/DIV are uncalibrated)
GRS-6032: 50nS/DIV (10nS/DIV ~ 40nS/DIV are uncalibrated)
ALT-MAG Function YES
HOLD-OFF Time Variable

TRIGGER SYSTEM

Trigger Modes AUTO, NORM, TV
Trigger Source VERT, CH1, CH2, LINE, EXT
Trigger Coupling AC, HFR, LFR, TV-V(-), TV-H(-)
Trigger Slope "+" or   "-" polarity
ALT Trigger YES
Trigger Sensitivity
GRS-6052
CH1,2
VERT -MODE
EXT
20Hz ~ 5MHz
0.5 DIV
2.0 DIV
200mV
5MHz ~ 40MHz
1.5 DIV
3.0 DIV
800mV
40MHz ~ 50MHz
2.0 DIV
3.5 DIV
1V
GRS-6032
CH1,2
VERT -MODE
EXT
20Hz ~ 5MHz
0.5 DIV
2.0 DIV
200mV
5MHz ~ 40MHz
1.5 DIV
3.0 DIV
800mV
TV sync pulse more than 1 DIV (CH1, CH2, VERT-MODE) or 200mV(EXT)
External Trigger Input Input Impedance: Approx. 1MΩ // 25pF (AC coupling)
Max. input voltage: 400V (DC+AC peak) at 1kHz

X-Y OPERATION

Input X-axis:CH1 ; Y-axis:CH2
Sensitivity 1mV/DIV ~ 20V/DIV
Bandwidth X-axis: DC ~ 500kHz (-3dB)
Phase Difference 3º or less from DC to 50kHz

DIGITAL STORAGE

Acquisition Memory
 		 8 bit ADC x 2
Maximum Sampling rate 500MS/s for Equivalent time sampling
20MS/s for normal sampling
Storage Bandwidth Single shot:DC~5MHz(-3dB)
Repetivivevent:
GRS-6052: DC~50MHz ±5DIV
GRS-6032: DC~30MHz ±5DIV
Dynamic Range ±5DIV
Memory Length Acquisition Memory: 2kW/CH*2, 1kW/CH(equivalent)
Save REF Memory: 1kW/CH*10 with back-up memory
Display memory: 1kW/CH*4 waveform (max.)
Sweep Time Equivalent: 0.2µs/DIV~2µs/DIV
Normal: 5µs/DIV~0.1s/DIV
ROLL:0.2s/DIV~100s/DIV
Sweep Magnification
 		 x5, x10, x20
Max. Sweep Time
 		 10ns/DIV
MAG Interpolation
 		 DOT, Linear
ALT-MAG Function
 		 YES
Operation Mode
 		 Auto, Norm, Single, Single-Roll, Roll, X-Y, Average(2~256), Run/Stop
Smoothing Function
 		 Dot joint ON/OFF selectable
Pre-Trigger
 		 0~10DIV in 0.02DIV steps
X-Y Operation
 		 X-axis: CH1, Y-axis: CH2
Storage Bandwidth:
GOS-6052: DC~50MHz(-3dB)
GOS-6032: DC~30MHz(-3dB)
Display Resolution
 		 H:100points/DIV ; V:25 points/DIV
X-Y: 25*25 points/DIV
Waveform SAVE/RECALL
 		 10 sets (REF0~REF9)
CURSOR READOUT Cursor Measurement
 		 ΔV, ΔT, 1/ΔT
Readout Intensity Adjustable

OUTPUT SIGNAL

CH1 Signal Output Voltage: approx. 20mV/DIV (with 50Ω terminated);
Bandwidth: 50Hz~5MHz
Calibrator Output Voltage: 0.5V ±3%
Frequency: approx. 1kHz,  Square wave
INTERFACE
 		 RS-232C Interface
POWER SOURCE AC 100V/120V/ 230V + 10%, 50/60Hz
ACCESSORIES Power cord x 1, Instruction manual x 1, Probes(10:1/1:1) x 2
DIMENSIONS & WEIGHT 275(W) x 130(H) x 370(D) mm, Approx. 7.2kg

 

  Ordering Information
spacer.gif (807 bytes)
spacer.gif (807 bytes)
spacer.gif (807 bytes)
GRS-6032          DC~30MHz, 20MS/s $995.00 *
GRS-6052   DC~50MHz, 20MS/s $1,375.00 *
Includes.....    (1) Instruction Manual
   (1) Power Cord
  (2) Probes(10:1/1:1) x 2
* When placing your order,  be sure to ask for your INTERNET DISCOUNT

  Home  |  Products  |  Price quote  |  Contact us   |  Search

 1-800-282-5632