EXPHIL EXPRESS

(800) 282-5632
instek analog scopes  
GDS-806 / GDS-810 Series
Digital Storage Oscilloscopes 

  Home  |  Products  |  Price quote  |  Contact us  |  Search
spacer.gif (807 bytes)
 Instek GDS-800 Series Digital Scopes.....Up To 250 MHz,  125K Memory Depth
spacer.gif (807 bytes)
spacer.gif (807 bytes)

Lowest Price.......SAVE at least 10% on all Instek Products.... Call Now.....800-282-5632

Compare Our Price / Performance to the Tektronix TDS1000,  TDS2000 Series !!

 

Go to Ordering Information

 Download Data Sheet / Specs (pdf) pdf.gif (95 bytes)

 

 

  • 60MHz / 100MHz Bandwidth with either Color or Monochrome LCD Display
  • 125K Memory and 12 Division Horizontal Display
  • 25GS/s Sampling Rate for Repetitive Waveforms 
  • 15 Auto Measurement Functions
  • Advance Trigger: Pulse Width, TV-Line, Event Delay and Time Delay
  • Go No/Go, Learn Mode and Auto Setup Sequence
  • FFT Function
  • Standard Interfaces:  RS232,            Optional: USB, Printer Port, GPIB Interface

 

 

  Selection Guide.....
spacer.gif (807 bytes)
spacer.gif (807 bytes)

 

Model Bandwidth Sample Rate Display I/O
GDS-810C 100 MHz 100 MS/s (ETS: 25GS/s) COLOR 5.7" LCD (320 x 240) RS232 Standard,    Optional GPIB, Printer Port,  USB,
GDS-810S 100 MHz 100 MS/s (ETS: 25GS/s) Mono 5.7" LCD (320 x 240) RS232 Standard,    Optional GPIB, Printer Port,  USB,
GDS-806C 60MHz 100 MS/s (ETS: 25GS/s) COLOR 5.7" LCD (320 x 240) RS232 Standard,    Optional GPIB, Printer Port,  USB,
GDS-806S 60 MHz 100 MS/s (ETS: 25GS/s) Mono 5.7" LCD (320 x 240) RS232 Standard,    Optional GPIB, Printer Port,  USB,

 

  Specifications.....
spacer.gif (807 bytes)
spacer.gif (807 bytes)

 

Display System

 
Display Device

GDS-806S

GDS-806C

GDS-810S

GDS-810C
Mono
5.7" LCD		 COLOR
5.7" LCD		 Mono
5.7" LCD		 COLOR
5.7" LCD
Display Contrast
Adjustable
Waveform Display Graticule
8 x 10 divisions (8 x 12 div, when menu off)
Display Mode
Dot, Vector, Accumulate

Vertical System

 
Bandwidth (-3dB)

GDS-806S

GDS-806C

GDS-810S

GDS-810C
DC~60MHz
DC~60MHz
DC~100MHz
DC~100MHz
Channels
2
Resolution
8 bit
Sensitivity
2mV / DIV ~ 5V / DIV
Accuracy
+3%
Rise Time

GDS-806S

GDS-806C

GDS-810S

GDS-810C
<5.8ns
<5.8ns
<3.5ns
<3.5ns
Input Coupling
AC, DC, GND
Input Impedance
1MΩ + 2%, ~ 18pF
Polarity
Positive& Negative
Maximum Voltage Between Signal and Common at input BNC
300V (DC + AC peak), CAT II
Waveform Signal Process
CH1-CH2, CH1+CH2, FFT
Offset Range
2mV/div ~ 50mV/div: ±0.5V ; 100mV/div ~ 500mV/div: ±5V ; 1V/div ~ 5V/div: ±50V
Bandwidth Limit
20MHz (-3dB)

Horizontal System

 
Range
1nS/DIV ~10S / DIV ; Roll: 250mS/DIV ~ 10S/DIV (1-2-5 increments)
Modes
MAIN, WINDOW, WINDOW ZOOM, ROLL, X-Y
Accuracy
+0.01%
Delay Range
Pre-trigger : 20 DIV, Post-trigger : 1000 DIV

Signal Acquisition System
Real-time Sample Rate
100MSa/s maximum on each channel
Equivalent Sample Rate
25GSa/s maximum on each channel
Record Length
125k / CH
Peak Detection
10nS (500nS/DIV ~ 10S/DIV)
Acquisition Mode
Sample, Peak Detect, Average
Average
2, 4, 8, 16, 32, 64, 128, 256

Trigger System

  
Source
CH1, CH2, LINE, EXT
Modes
AUTO-LEVEL, AUTO, NORMAL, SINGLE, TV, TIME DELAY, /EVENT DELAY, EDGE, PULSE WIDTH
Coupling
AC, DC, LF rej, HF rej, Noise rej
Sensitivity

GDS-806S

GDS-806C

GDS-810S

GDS-810C
DC ~ 25MHz : approx. 0.35 DIV or 3.5mV ;
25MHz ~ 60MHz : approx. 1.5 DIV or 15mV
DC ~ 25MHz : approx. 0.35 DIV or 3.5mV ;
25MHz ~100MHz : approx. 1.5 DIV or 10mV

External Trigger

  
Range
+15V
Sensitivity

GDS-806S

GDS-806C

GDS-810S

GDS-810C
DC ~ 30MHz : approx. 50mV ;
30MHz ~ 60MHz : approx. 100mV
DC ~ 30MHz : approx. 50mV ;
30MHz ~ 100MHz : approx. 100mV;
 
Input Impedance
1MΩ + 2%, ~ 22pF
Maximum Input
300V (DC + AC peak), CAT II

X-Y Mode

  
X-Axis Input / Y-Axis Input
Channel 1 (CH1) / Channel 2 (CH2)
Phase Shift
+3° at 100kHz

Cursor & Measurement

  
Automated Voltage Measurement
Vhi, Vlo, Vmax, Vmin, Vpp, Vavg, Vrms, Vamp
Automated Time Measurement
Rise Time, Fall Time, Duty Cycle, Frequency, Period, Positive Width, Negative Width
Cursor Measurement
Voltage difference between cursors (ΔV)
time difference between cursors (ΔT)
Frequency difference between cursors (1/ΔT)

Frequency Counter

 
Readout Resolution
6 digits
Range
AC Coupled, 10Hz minimum to rated bandwidth
Signal Source
All available trigger source except the Pulse Width & Video Trigger mode
Control Panel Functions  
Autoset
"Autoset" adjust vertical (volt/DIV), horizontal (sec/DIV), and trigger level automatically
Save/Recall
Up to 15 sets of measurement conditions can be saved and recalled
Waveform Trace Save/Recall
2 sets of waveform can be saved and recalled
Interface    

RS-232 Interface

GDS-806S

GDS-806C

GDS-810S

GDS-810C
STD.
STD.
STD.
STD.
USB Interface
OPT
OPT.
OPT.
OPT.
Printer port
OPT.
OPT.
OPT.
OPT.
Go-No Go Output
STD.
STD.
STD.
STD.
GPIB Interface
OPT.
OPT.
OPT.
OPT.
Power Source    
Line Voltage Range
100V ~ 240V AC, automatic selection
Line Frequency
48Hz ~ 63Hz
Power Consumption
85Watts, 95VA maximum, with fan
Accessories
Power cord x 1 ;
Instruction manual x 1 ;
GDS-820 Series: GTP-150A Probes(10:1/1:1) x 2
GDS-840 Series: GTP-250A Probes(10:1/1:1) x 2
 
Dimensions & Weight
254(W) x 142(H) x 310(D) mm, Approx. 4.1kg

 
Return to Top of Page

  Ordering Information.....
spacer.gif (807 bytes)
spacer.gif (807 bytes)
spacer.gif (807 bytes)
GDS-806S    60 MHz DSO, RS232,  Mono Display $755.00*
GDS-806C    60MHz DSO, RS232, COLOR Display $935.00*
GDS-810S   100MHz DSO, RS232, Mono Display $1,040.00*
GDS-810C    100MHz DSO, RS232, COLOR Display $1,260.00*
spacer.gif (807 bytes)
OPT.1    Add GPIB, USB and Printer Ports $280.00*
* When placing your order,  be sure to ask for your INTERNET DISCOUNT

Back to Digital Oscilloscope Selection Guides
  Home  |  Products  |  Price quote  |  Contact us  |  Search  (800) 282-5632