Fluke 867B Graphical MultiMeter
Discontinued Please call for
recommended replacementThe Fluke
867B is the ultimate handheld tool for any application that demands real precision. Its
0.025% basic accuracy makes the 867B GMM tool an excellent choice for critical
measurements. The 867B delivers the ultimate combination of functions and accuracy
available in one handheld tool.
Waveform Display to 1 MHz
Safety-rated to 1000V
Digital Display/Counts
Selectable True-rms or Average Sensing
Continuity/Conductance/Capacitance
Duty Cycle/Pulse Width/Period/Frequency
Min/Max/Average with Time Stamp
Relative Mode
Touch Hold® and Peak Hold
dB, AutoDiode™
Auto/Manual Ranging, Smoothing™
RS232 Interface (software and cable optional)
Logic Activity
Component Test
LCD backlight
Waveform memory
Built-in NiCad charging
Battery Eliminator
0.025% basic dc accuracy to discriminate low-level signal
variations in transducers and analog electronics.
Direct current from 0 to 10 Amps, with resolution down to
10nA
Capacitance from 40pF to 10,000 µF
Measure dB gain or loss in amplifiers, filters, or
attenuators
Tested for IEC 1010-1, CAT III 1000 Volts for industrial
distribution systems
And more: AutoDiode™, TouchHold®,
Smoothing™, Relative, Peak Hold, Auto/Manual Ranging
RS-232 Interface for communication to computers and
printers. Import waveforms into reports (software and cable optional).
Six test tools in one
Here's one test tool that's six test tools in one:
Fluke's most accurate Multimeter, from the company
that makes the best multimeters in the world. With Fluke's guaranteed ruggedness and
reliability.
Easy-to-use Waveform Display from dc to 1 MHz.
Troubleshooting no longer means groping in the dark. Waveforms are like x-ray pictures of
your electrical system. With automatic set-up you get the best view without
fiddling with timebase, trigger levels, position, etc.
A Recorder that plots high resolution meter readings
in intervals from 1 second to 15 minutes. Record your data in one of three modes-sample,
high/low or average. With the RS-232 interface, you can connect to your computer using
FlukeView software and collect as much data as your hard disk can accommodate (software
and cable optional).
Component Test for checking voltage-current
signatures on resistors, capacitors, semiconductors and more.
Logic Test offers a simple way to indicate logic
transitions to 10 MHz, showing if a circuit is active, stuck high, or stuck low.
A Frequency Counter that measures up to 10 MHz.
|
 |
