EXPHIL EXPRESS

(800) 282-5632
flukelogo2.gif (1195 bytes)
Fluke 80 Series V Multimeters 
  Home  |  Products  |  Price quote  |  Contact us  |  Search
spacer.gif (807 bytes)
  Fluke 80 Series V Multimeters.....  Versatility, accuracy, and safety features - including frequency, capacitance, and duty cycle
spacer.gif (807 bytes)
spacer.gif (807 bytes)

Go to Ordering Information

Go to Features

Click Here for Detailed Specifications

 
Accuracy and diagnostic functions for maximum industrial productivity
 

Fluke 80 Series V has replaced series 80 Series III. For information on Series III, click here

The new Fluke 87V has improved measurement functions, trouble-shooting features, resolution and accuracy to solve more problems on motor drives, in plant automation, power distribution and electro-mechanical equipment.

The New 80 Series consists on the following models:

  • Fluke 83 V Industrial DMM
  • Fluke 87 V True RMS Industrial DMM
  • Fluke 87 V/E Industrial Electricians Combo Kit

    The 87V operates very similar to the classic 87, but with more problem solving power, safety, convenience and impact protection.

    The new 80 series V are independently tested to comply with the 2nd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600V/CAT III 1000V. They can withstand impulses in excess of 8,000 V and reduce risks related to surges and spikes.

     

    		•

    fluke lifetime-warranty.gif (3582 bytes)

    Fluke 80 Series V Digital Multimeter Features

    Product Home | Features | Specifications | PDF Specifications download

     

     

    New features for maximum productivity

     

  • Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment (87V)
  • Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument (87V)
  • Optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks
  • Large digit display with bright, two-level backlight makes the 80 Series V significantly easier to read than older models

     

    Feature 83V 87V
    True-rms ac voltage and current for accurate measurements on non linear signals   •
    Selectable filter for accurate voltage and frequency measurements on motor drives   •
    0.05 % dc accuracy   •
    6000 counts, 3-3/4 digits • •
    4-1/2 digit mode for precise measurements (20,000 counts)   •
    Measure up to 1000 V ac and dc • •
    Measure up to 10 A, 20 A for up to 30 seconds • •
    Built in thermometer lets you carry one less tool (TC probe included)   •
    Frequency to 200 kHz and % duty cycle • •
    Resistance, continuity and diode test • •
    10,000 µF capacitance range for components and motor caps • •
    Min/Max-Average recording with Min/Max Alert to capture variations automatically • •
    Peak capture to record transients as fast as 250 µs   •
    Relative mode to remove test lead interference from low ohms measurements • •
    Auto and manual ranging for maximum flexibility • •
    Touch Hold to capture stable readings avoiding noisy signals • •
    Large display digits and two-level bright white backlight for increased visibility • •
    Analog bargraph for fast changing or unstable signals • •
    Input Alert provides audible warning against wrong use of input jacks • •
    Improved selectable sleep mode for long battery life • •
    Access door for fast battery changes without breaking the calibration seal • •
    "Classic" design with new removable holster with built in test lead and probe storage • •
    Limited Lifetime warranty • •




     

     

    Electrical safety

    All inputs are protected to Category III, 1000 V and Category IV 600 V. They can withstand impulses in excess of 8,000 V and reduce risks related to surges and spikes.

    Correctly measure pulse-width modulated motor drive signals

    The new Fluke 87V is designed specifically to handle complex signals produced by adjustable speed motor drives. Think of the potential productivity you'll gain by taking the guesswork out of drive system troubleshooting. Measurements are correct each and every time.

  • Unique function for accurate measurements of noisy pulse-width modulated AC voltage. Measures correctly at the ASD and at the motor terminals
  • Accurately measure the frequency (motor speed). Frequency measurement not affected by the ASDs carrier frequency
  • Measure AC current with an optional current clamp accessory
  • Compare readings from the 87V with the display on the ASD
  • Special shielding blocks high frequency, high-energy noise generated by large drive systems

     
    		•
    Complex PWM drive signals are not a problem for the Fluke 87V Pulse-width modulated detail of 50 Hz motor drive output voltage. 1000 V, 50 micro-second pulses can cause erratic behavior in some test equipment.


     

     

    This meter reading of the output voltage is with the low pass filter enabled. The reading compares well with the drive's display value.




     

     

    This meter reading without the low pass filter enabled is approximately 30% higher than the actual drive output voltage. This reading utilizes the meters full 20 kHz bandwidth. Many other multimeters available today will not provide readings which compare to the drives display value

     

    Fluke 87V/E2 Industrial Electrician Combo Kit
    Includes:
  • 1.5 m heat resistant silicone test leads
  • Removable test probes with 4 mm of exposed metal for use on industrial circuits
  • Retractable long reach alligator clips
  • Magnetic hanger to position and hold meter to steel surfaces
  • Temperature probe
  • Durable carrying case
     
    		•

    Fluke 87V/AEK Advanced Electronic Combo Kit

    Includes:
  • TL81A Deluxe Electronics Test Kit
  • Soft carrying case
     
    		•

    See how the new 87V compares to the original Fluke 87

     

       
    Function Original 87 87V Productivity Increase
    Selectable filter for motor drives No Yes Accurate voltage and frequency measurements on pulse width modulated signals
    Built in thermometer No Yes No need to carry a separate thermometer
    Capacitance 5 nf to 5 µF 5 nf to 10,000 µF Measure more capacitors
    VDC accuracy and resolution 0.1 %, 10 µV 0.05 %, 10 µV Precise measurements in a hand held package
    Display digits 13.5 X 7 mm 15.25 X 8.5 mm 30 % larger makes it easy to read
    Backlight Green 2-level, bright white Easier to read in dark locations
    Magnetic hanger No Optional Position meter for easy viewing
    Peak capture 1ms 250 µS Record intermittent problems 4 times faster
    CAT electrical safety rating No Yes, 2nd edition ANSI and IEC Increased protection from 8kV spikes that can cause arc flash
    Battery door No Yes Change battery quickly without breaking cal seal
    Warranty Expired Limited Lifetime Lower cost of ownership

    Return To Top of Page


     

    •  
      Ordering Information.....
    spacer.gif (807 bytes)
    spacer.gif (807 bytes)
    spacer.gif (807 bytes)
    Fluke 83V Series V Digital Multimeter $359.95*
    Fluke 87V Series V TruRMs Digital Multimeter $369.00 Introductory Web Special .....only $323.00 !!!
    Fluke 87V/E2 Kit Series V Digital Multimeter  Industrial Electrician Combo Kit $419.95*
    Fluke 87V/AEK Kit Series V Digital Multimeter  Advanced Electronics Combo Kit $419.95*
    spacer.gif (807 bytes)
    Includes..... Removable yellow protective holster and flex stand
    Operators guide,  CD ROM with user manuals
    TL75 Test leads ( 87/E TL222 Test leads)
    AC72A Alligator clips  (87/E AC220)
      Temperature Probe (87,  87/E)  
    9V Battery
    * When placing your order,  be sure to ask for your INTERNET DISCOUNT

      Home  |  Products  |  Price quote  |  Contact us   |  Search

    		 1-800-282-5632