Fluke 430 Series Power Quality Analyzers

Fluke 430 Series Three-Phase Power Quality Analyzers

Pinpoint power quality problems faster, safer and in greater detail

These three-phase power quality meters help you locate, predict, prevent and troubleshoot problems in power distribution systems. These easy-to-use power quality tools are a “must have” for any person who maintains or troubleshoots three phase power. The new IEC Class A standards for flicker and power quality are built right in to take the guess work out of power monitoring.

Applications

Frontline troubleshooting – quickly diagnose problems on-screen to get your operation back online
Predictive maintenance – detect and prevent power quality issues before they cause downtime
Quality of service compliance – validate incoming power quality at the service entrance
Long-term analysis – uncover hard-to-find or intermittent issues
Load studies – verify electrical system capacity before adding loads
Energy assessments – quantify energy consumption before and after improvements to justify energy saving devices

Troubleshoot real-time: Analyze the trends using the cursors and zoom tools—even while background recording continues

Highest safety rating in the industry: 600 V Cat IV/1000 V CAT III rated for use at the service entrance

Automatic transient mode: Captures 200 kHz waveform data on all phases simultaneously: Up to 6 kV

Fully Class A compliant: Conduct tests according to the stringent international IEC 61000-4-30 Class A standard

Measure all three phases and neutral: With included four current probes

AutoTrend: Every measurement you see is always automatically recorded, without any setup

System-monitor: Up to seven power quality parameters on one screen according to EN50160 power quality standard

Inrush mode: For troubleshooting nuisance circuit breaker tripping

View graphs and generate reports: With included analysis software

Logger function: Configure for any test condition with memory for over 400 parameters at user defined intervals

Mains signaling: Measure interference from ripple control signals at specific frequencies

Battery Life: Seven hours operating time per charge on NiMH battery pack

Warranty: Rugged, handheld troubleshooter with Fluke three-year warranty

AutoTrend automatically records all displayed parameters in the background Toggle between data and trend view and use cursors and zoom to analyze measurements without interrupting the recording

Unique AutoTrend gives you fast insight into changes over time. Every displayed reading is automatically and continuously recorded without having to set up threshold levels or interval times, or having to manually start the process. You can quickly view trends in voltage, current, frequency, power, harmonics or flicker on all three phases plus neutral. And you can analyze the trends using the cursors and zoom function – even while background recording continues.

SystemMonitor - Check performance against EN50160 or your own custom specifications with ease

The System-Monitor overview screen gives instant insight into whether the voltage, harmonics, flicker, frequency and the number of dips and swells fall outside the set limits

With a single push of a button, the unique System-Monitor gives you an overview of power system performance, and checks the compliance of incoming power to EN50160 limits or to your own custom specifications. The overview is shown on a single screen, with color-coded bars clearly indicating which parameters fall outside the limits. A list of each event falling outside these limits is generated.

Every time an event or distortion on the voltage waveform is detected, the instrument triggers and automatically stores voltage and current waveforms on all three phases and neutral. The instrument can also trigger when a certain current value level is exceeded. Up to 100 dips, swells, interruptions and transients can be captured in this way. You can see voltage transients as high as 6 kV and as fast as 5 microseconds.

Extensive data analysis possibilities

The Fluke 430 series provides three ways to analyze the measurements. Cursors and zoom can be used ‘live’ while taking the measurements, or ‘offline’ on stored measurement data. The stored measurements can also be transferred to a PC with FlukeView. This software’s "view” mode allows cursors and zoom to be used on stored measurements as if actually working with the instrument. To perform custom analysis and to create reports, measurement data can be exported to common spreadsheet programs. The instrument can store up 10 measurements, where each measurement can contain up to 32 parameters recorded for more than a year, and up to 50 screens

600 V CAT IV safety rating

Designed to help protect you and your equipment against electrical shock and fire, the Fluke 430 Series analyzers, accessories and charger are all certified to meet the stringent safety standards for use in 600 V CAT IV and 1000 V CAT III environments. They are the first tools of their kind to carry the CAT IV rating and can therefore be used at virtually all power connections and outlets in low-voltage power distribution systems

One tool to do the job

* Optional functionality can be added with upgrade kit. For details see ordering information.


Scope view shows voltage and current waveforms for all three phases. You can toggle to a phasor diagram at any time	Phasor diagram shows voltage and current unbalance, and helps verify connections


Record dips and swells as short as one half-cycle with min/max/avg readings	Track harmonics up to the 50th, and measure and record THD in accordance with IEC61000-4-7 requirements


Measure and record power (W), VA, and VARs. The 434 adds the ability to record energy consumption	Inrush function captures starting current on motors and other devices to help determine trip levels

Fluke 434	Power Quality Analyzer	$5,010.00*
Fluke 434 Basic	Power Quality Analyzer without Probes	$4,505.00*
Fluke 433/UGK	fFluke 433 Adv Func SW CableUpgrade Kit	$1,155.00*
Fluke 434/LOG	fFirmware/Software Upgrade for Fluke 434	$1,590.00*

Fluke 435	Power Quality Analyzer with PowerLog SW	$7,010.00*
Fluke 435 Basic	Power Quality Analyzer with PowerLog SW without Probes	$6,410.00*


Ordering Information	Specifications	Download Data Sheet (.pdf)


The full color display uses industry-standard color-coding (user selectable) to correlate measurements with actual wiring	Simple menu structure with logical function grouping gives fast access to key measurements

Fluke 430Power Quality Analyzers