MO280-KH2:
Professional Home Inspection Kit
Aids in identification of moisture,
HVAC, electrical and hot water system issues
- Kit includes: MO280 Pinless Moisture Meter, 42500
Mini IR Thermometer, 39240 Waterproof Stem thermometer
- Aids in identification of moisture, HVAC, electrical
and hot water system issues
- Supplied in an attractive storage case
-
For complete specs please download the product datasheet
|
 |
| |
EX400 Series Data Sheet |
True RMS
AC Voltage/Current Data Logger DL150
- Measure True RMS AC Voltage (600V) or Current (200A)
- Readings can be downloaded to your PC via the USB
interface and analyzed using the included software or exported to a
spreadsheet
- High/Low user-settable alarms
- LCD indicates time/date, current readings, Min/Max, and
whether alarm settings have been exceeded
- Normal, Peak and Capture (user-specified trigger level)
recording modes
- Auto Power off and battery check
- Complete with current clamp, test leads, USB cable,
Windows® compatible software, universal AC Adaptor, and 3.6V Lithium
battery
- For
complete specs please download the product datasheet
|
 |
| |
|
| |
RT30:
Wireless AC Circuit Identifier (914MHz) with External Probe
Local & Remote non-contact Voltage
Detection + Remote Light Detection
This product is the winner of
HKEIA 2009 Bronze Award
- Combines non-contact voltage and light detection with
RF (Radio Frequency) transmission technology
- Remotely identifies mid-run AC wiring, circuit
breakers, switched lines, AC outlets, and light fixtures
- Non-contact mid-run AC wiring identification without
cutting into wires
- Lighting circuit identification using built-in light
sensor
- Non-contact handheld voltage (NCV) detection
- External NCV probe can be used to identify wiring in
hard-to-reach areas where the transmitting unit cannot fit
- AC Outlet Extender can be used to identify AC outlets
- Complete with transmitter, receiver, remote probe, 4
AAA batteries and case
- For
complete specs please download the product datasheet
|
 |
DA50:
Telescoping AC Current Detector
39" (1m) Non-Contact current detector (up to 1000A)
- Non-Contact Detection of AC Current from 200mA to
1000A
- Ideal for use on shielded wires or conduit behind
walls, metal circuit breaker or junction boxes
- Telescoping probe extends to 36" (0.9m) with reach
distance of 39" (1m)
- For use on 50/60Hz circuits
- Red LED light indicator and switch-controlled ON/OFF
Audible beeper
- Sensitivity adjustment increases or reduces sensor
trigger threshold
- For
complete specs please download the product datasheet
DV50:
Telescoping AC Voltage Detector
39" (1m) Non-Contact voltage detector (1000V AC)
- Non-Contact Detection of AC Voltage from 6VAC to
1000VAC
- Telescoping probe extends to 36" (0.9m) with reach
distance of 39" (1m)
- For use on 50/60Hz circuits
- Red LED light indicator and switch-controlled
ON/OFF Audible beeper
- Sensitivity adjustment increases or reduces sensor
trigger threshold
-
For complete specs please download the product datasheet
|
 |
EM100:
Smart Plug-In Energy Monitor with Rotating Plug Socket
Computes cost of operation and
stores power usage for analysis
- Monitor and record real time power usage of motors,
pumps and appliances
- Internal memory stores up to 6 months of data at 1
minute intervals
- Transfer data to a PC using an SD card (not included)
- Windows® compatible software included for analysis
and report generation
- Display line Voltage, Current, Frequency, Watts, VA
and PF
- Displays ID, kWh and cost of operating the plugged in
device
- Projects cost of operation per week, month and year
- Records Min/Max values for Voltage, Current, Active
Power, Apparent Power and Power Factor
- Operates from 100V-125V; 50/60Hz; 12A max
-
For complete specs please download the product datasheet
|
 |
CO250:
Portable Indoor Air Quality CO2 Meter/Datalogger
Measures
Carbon Dioxide (CO2) , Temperature, Humidity, Dew Point, and Wet
Bulb
- Checks for Carbon Dioxide (CO2) concentrations
- Calculates statistical weighted averages of TWA (8 hour time
weighted average) and STEL (15 minute short term exposure limit)
- Maintenance free NDIR (non-dispersive infrared) CO2
sensor
- Measurement ranges:
- CO2: 0 to 5,000ppm
- Temperature: -14 to 140°F (-10 to 60°C)
- Humidity: 0.0 to 99.9%
- User programmable audible alarm
- Backlit triple LCD display
- Built-in RS-232 interface for capturing readings on PC
- Data acquisition software and cable included to record and document
CO2, Humidity and Temperature data
- Optional 33% and 75% RH calibration bottles
- Complete with software and cable, 4 AA batteries, and carrying case
- For complete specs please download the
product datasheet
|
 |
CO200:
Desktop Indoor Air Quality CO2 Monitor
Measures
Carbon Dioxide (C02), Air Temperature and Humidity
- Checks for Carbon Dioxide (CO2) concentrations with
Max/Min value recall function
- Maintenance free NDIR (non-dispersive infrared) CO2
sensor
- Indoor Air Quality displayed in ppm with Good (380 to 420ppm),
Normal (<1000ppm), Poor (>1000ppm) indication
- Visible and Audible CO2 warning alarm with relay output
for ventilation control
- Measurement ranges:
- CO2: 0 to 9,999ppm
- Temperature: -4 to 140°F (-10 to 60°C)
- Humidity: 0.1 to 99.9%RH
- Displays Year, Month, Date, and Time
- Automatic Baseline Calibration (minimum CO2 level over
7.5 days) or manual calibration in fresh air
-
For complete specs please download the product datasheet
|
 |
|
|
|
| |
|
|
