 |
DV20 AC Voltage
Detector/Flashlight
Non-contact detection of AC
Voltage with built -in flashlight
- Non-Contact Detection of AC Voltage from 100VAC to
600VAC
- Rugged, double molded case
- Suitable for outlets or against wire insulation
testing
- Red LED light indicator
- Built-in bright flashlight with ON/OFF button
- $13
|
 |
DVA30 Non-Contact AC
Voltage and Current Detector
- The only two-in-one current/voltage detector
designed for electrical testing
- Non-Contact AC Voltage detection
from 12V to 600VAC
- Non-Contact AC Current detection
from 200mA to 1000A
- Sensitivity adjustments to increase or
reduce sensor trigger threshold
- Current sensor detects current flow through
shielded wires, conduit, and metal circuit breaker/junction boxes
- $39
|
 |
DA30 Non-Contact
Current Detector
- Non-contact AC Current range is from 200mA to 1000A
- Locates current flow even where voltage detectors
cannot work
- Detects through shielded wires, conduit, and metal
circuit breaker or junction boxes
- Sensitivity adjustment for locating wires/conduit
through walls
- Audible and visible indication
- $29
|
 |
DV30 Adjustable AC
Voltage Detector
- Non-Contact detection of AC Voltage from 12VAC to
600VAC
- Sensitivity adjustment increases or reduces sensor
trigger threshold
- Audible and visible voltage indication
- Self test function
- UL and CE approved; CAT III-600V
- $13
|
 |
40130 AC Voltage
Detector
- Non-Contact Detection of AC Voltage from 100VAC to
600VAC
- For use on 50/60Hz circuits
- Tip fits into outlets or against wire insulation
- Flashing red LED light and push button ON/OFF
Audible beeper indicator
- UL and CE approved; CAT III-600V
- $10
|
 |
ET34 Voltage and
Continuity Tester
- Bright indicating LEDs at 12, 24, 120, 208,
240, 277 and 480V
- Audible and Visible continuity test up to 200kΩ
- Single pole live voltage detector
- Voltage function operates without batteries
- CAT III-600V
- Call
|
 |
401050 AC/DC Voltage
Detector
- Contact AC Voltage from 70 to 250VAC
- Non-contact AC Voltage from 70 to 600VAC
- Continuity Check from 0 to 5M Ohms
- Self Test insures proper battery installation and
battery life
- Dimensions: 5.6x0.6x0.6" (142.2x15.2x15.2mm)
Weight: 0.7oz (19.8g)
- Complete with two button batteries
- Call
|